|
001 Milled Titanium Implant Bar 002 Screw-retained Zirconia Br 003 Screw-retained Zirconia Br 004 Hybrid Acrylic with Ti Frame 005 Milled PMMA Eggshell Temp 006 Screw-retained Zirconia Br
|
 |
|
| home > interesting cases > milled titanium implant bar > case 001.1 | |
 |
|
 |
STEP1 TEETH-SETUP AND TRY-IN |
 |
STEP1 TEETH-SETUP AND TRY-IN Relined baseplate in order to seat well on implant and working model. |
 |
STEP2 CAD-CAM Try-in denture was scanned into CAD software and used as situation model. Bar could be designed precisely and provide sufficient space for the substructure of overdenture. |
 |
STEP2 CAD-CAM |
 |
STEP2 CAD-CAM |
 |
STEP2 CAD-CAM |
 |
STEP3 MILLED TITANIUM BAR |
 |
STEP3 MILLED TITANIUM BAR |
 |
STEP3 MILLED TITANIUM BAR |
 |
STEP4 THE FRAME OF OVERDENTURE TThe substructure made of Co-Cr casting with conventional lost-wax technique. |
 |
STEP4 THE FRAME OF OVERDENTURE TThe substructure made of Co-Cr casting with conventional lost-wax technique. |
 |
STEP5 FINAL PROSTHESIS
|
 |
STEP5 FINAL PROSTHESIS |
 |
STEP5 FINAL PROSTHESIS |
 |
STEP5 FINAL PROSTHESIS |
 |
STEP5 FINAL PROSTHESIS |