|
001 Milled Titanium Implant Bar 002 Screw-retained Zirconia Br 003 Screw-retained Zirconia Br 004 Hybrid Acrylic with Ti Frame 005 Milled PMMA Eggshell Temp 006 Screw-retained Zirconia Br |
 |
|
 |
|
 |
|
 |
STEP1 WAX-UP |
 |
STEP1 WAX-UP |
 |
STEP1 WAX-UP |
 |
STEP1 WAX-UP |
 |
STEP1 WAX-UP |
 |
STEP2 CAD-CAM Scan wax-up. |
 |
STEP2 CAD-CAM Define margin of each tooth. Eggshell CAD software immitated the external surface of wax-up. |
 |
STEP2 CAD-CAM Eggshell CAD software immitated the external surface of wax-up. |
 |
STEP2 CAD-CAM Eggshell CAD software immitated the external surface of wax-up. |
 |
STEP2 CAD-CAM Eggshell CAD software immitated the external surface of wax-up. Create connector between each teeth. |
 |
STEP2 CAD-CAM Eggshell CAD software immitated the external surface of wax-up. Create connector between each teeth. |
 |
STEP2 CAD-CAM Eggshell CAD software created 0.4 mm thickness inside of immitated external surface.
|
 |
STEP2 CAD-CAM Eggshell CAD software created 0.4 mm thickness inside of immitated external surface. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. Immitation of the external surface of wax-up. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. Immitation of the external surface of wax-up. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. Immitation of the external surface of wax-up. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. Immitation of the external surface of wax-up. |
 |
STEP3 FINAL PROSTHESIS Milled PMMA (Acrylic) with even 0.4 mm thickness across the whole surface. Immitation of the external surface of wax-up. |